* 본 제품은 조립식 KIT 이며, 차량의 차체 외의 기자재류는 미포함이므로, 주행에 필요한 기자재는 모두 별도로 구매하셔야 하는 제품입니다.
* 별도구매품목
- 2ch 이상의 차량용 송수신기 셋트
- 대형 사이즈의 조향서보2개, 대형 사이즈의 스로틀서보1개 (스탠다드 사이즈 호환불가)
- 수신기배터리
- 29cc 이상의 가솔린엔진 + 머플러셋트
- 옥탄가 91이상의 가솔린연료
- 2cycle 가솔린엔진용 엔진오일
- 가솔린전용 연료보관통
하이앤드급 차량명가 TLR Racing 에서 역대최초로 1/5 대형스케일 레이싱용 조립형버기를 출시하였습니다.챔피언 대명사 에이트 시리즈처럼 오직 우승을 위해 제작한 대형 5IVE-B 버기를 출시하였습니다.1/5 스케일에서 경기장에서 시합으로 사용할수있는 차량은 별로 없습니다.일단 샤시보시면 에이트확대형으로 보시면 됩니다.5mm 6061-T6 알류미늄재질 초강화 샤시입니다.강화 브레이크 시스템은 조절이 가능하도록 디자인되여있고 듀얼스테어링서보및 알류미늄 클러치 캐리어 및 센터 디프케이스는 4륜 독립구동시스템과 튼튼한 구조와 효율적인 드라이브구동성능을 보여줍니다.
듀얼 조향서보 트레이는 대부분 1/5대형사이즈 서보를 장착할수있도록 공간이
넉넉합니다.
Chassis
The 5IVE-B features a 5mm
6061-T6 aluminum chassis specifically engineered for competition. The chassis
plate has been inspired by the legendary TLR 8IGHT™ platform, featuring a
shorter wheel base than others for improved handling. The chassis plate also has
milled pockets that save weight and allow enough flex for maximum traction under
hard acceleration.
Heavy Duty Braking System
The
5IVE-B features stamped-steel rotors and, when combined with the heavy duty
plates and pads, provide a sense of confidence and control that allows racers to
drive harder into corners and come to a stop more quickly. Front-to-rear braking
bias can also be fine-tuned for evolving track conditions.
Dual-Steering-Servo Radio Tray
The
5IVE-B radio tray has been designed to accommodate the most powerful 1/5-scale
steering servos available. This includes the Spektrum™ line of 1/5-scale servos
with patent-pending Back EMF technology that prevents servo fade and maintains
maximum holding power for the duration of a receiver pack.
Racing Body and Wing
The
5IVE-B body has been inspired by those used on 1/8-scale racing buggies,
featuring a cab-forward design. This distinctive shape provides greater front
down force which improves steering. The wing features a removable wicker bill
for tailoring the rear down force to meet the precise track conditions.
Aluminum Clutch Carrier and Center Diff Case
The
5IVE-B features race-bred drive system engineered to exacting standards to
harness the power of a high-output gas engine during the most-extreme
conditions. The clutch and center differential are both CNC-machined aluminum,
providing strength and durability while helping to dissipate heat, keeping
things cool and providing more consistent performance throughout a run.
Hard-Anodized Aluminum Shocks and Shock Towers
The
hard anodized 24mm shocks include bleeder caps that make them easier to build
without sacrificing performance. The machined aluminum shock towers offer
multiple shock mounting options that give racers an abundance of tuning options
for different track conditions.
One-Piece Glue-Style Wheels
The
low rotational mass of these wheels allow the 5IVE-B to accelerate faster with
less stress on drivetrain components.
Air Filter Designed Specifically for the 5IVE-B Buggy
Whatever
25cc-to-32cc engine you install in your buggy the included air filter has been
designed for maximum air flow to the carb while keeping dirt, grit and debris
out of your engine. This translates into an air filter which provides maximum
protection while unleashing the monster horsepower your engine was built
for.
Axle Boots
Molded
rubber boots on the CVAs and center drive train dog bones increase U-joint life.
The boots help keep grease in and dirt out so your axles last longer and require
less maintenance.
Adjustable Toe and Anti-Squat Plates
For maximum tuning the 5IVE-B includes adjustable front and rear A-Arm mounts. By swapping out inserts you will be able to fine tune your car by altering the toe-in, anti-squat to maximize the traction and overall performance of the chassis.
Features:
Specifications:
Type:
1/5 Scale 4WD Buggy
Length:
32.75 - 33.25 in (831.8 - 844.5mm) Total length can change based on the wing
mount spacer used
Width:
18.0 in (457.2mm)
Height:
12.13 in (308mm)
Ground
Clearance:
3.5 in (88.9 mm)
Wheelbase:
22.75 in (577.9mm
Weight:
30.5 lbs (13.8kg)
Chassis:
5mm Plate, 6061-T6 Aluminum
Suspension:
4-Wheel Independent
Gear
Pitch:
1.5 Module
Wheel
Size:
5.5 in (139.7mm) x 2.5 in (63.5mm)
Kit/RTR:
Kit
Shock
Type:
24mm, Hard Anodized, Oil Filled with Bleeder Caps
Body:
Clear
Ball
Bearings:
Full Rubber Seal Ball Bearings in Car, Metal Shield for Clutch housing
Fuel
Tank Capacity:
27.1 oz (800cc)
Experience
Level:
Advanced
Recommended
Environment:
Outdoor
Assembly
Time:
7-9 Hours
Needed To Complete: