The original, 3S-capable TYPHON™ 4X4 BLX RTR Speed Buggy delivered power, strength, style — and the ability to reach extreme 50+ mph speeds. Now equipped with the high-quality Spektrum™ STX2 radio, it's an even smarter move into 1/8 scale buggy bashing!
** Please see the product manual for warranty details
The new Spektrum STX2 2.4GHz 2-channel radio system provides many of the features found in high-end 2.4GHz radio systems, including throttle and steering reversing, throttle and steering travel adjust, and throttle limiting. The radio system also includes the Spektrum SRX200 2-channel waterproof receiver.
ARRMA® powers the 1/8 TYPHON 4X4 3S BLX with its BLX100 brushless system for incredible torque, acceleration, and speed. This 3S LiPo-capable setup has already proven the speed and toughness of its 3200Kv brushless motor and 100A ESC, now equipped with an IC5™ connector (EC5™ compatible). The transmission and chassis are ruggedly engineered to take full advantage of the electronics' power — in ARRMA tradition, DESIGNED FAST, DESIGNED TOUGH.
The low center of gravity, with wide arms and narrow buggy wheels and tires, improves handling over all of your favorite bashing terrain — race tracks, trails, muddy courses, skate parks, and more. With its metallic-finish body and forged composite detail, the TYPHON 4X4 3S BLX also looks as great as it performs. A stylish, high-downforce wing keeps all four wheels planted as you explore the upper limits of its outrageous speed range!
Black multi-spoke wheels and 2-HQ all-terrain tires for superb traction and cornering wherever you may roam.
Approximate Assembly Time: | Less than 1 Hour |
Ball Bearings: | Transmission Only |
Batteries: | 5000mAh+ 35C+ 2-3S LiPo or 6-8 Cell NiMH Hardcase Battery with IC5/EC5 Connector (sold separately) |
Battery Dimensions: | 5.5 x 2 x 1.9" (140 x 51 x 48mm) with battery mounting blocks in place |
Body: | Painted, decals applied, and trimmed |
Brakes: | Electronic |
Bushing Material: | Plastic |
Charger: | Appropriate LiPo/NiMH charger (sold separately) |
Chassis: | Molded Composite |
Completion Level: | Ready-To-Run |
Differential: | Oil filled, metal internal geared differentials |
Drivetrain: | 4WD |
Final Drive Ratio: | 10.83:1 |
Gear Pitch: | 0.8 Module |
Ground Clearance: | 1.65 in (42mm) |
Height: | 7.68 in (195mm) |
Internal Gear Ratio: | 2.85:1 |
Length: | 20.12 in (511mm) |
Max Battery Dimensions: | 6.50 x 2 x 1.9" (165 x 51 x 48mm) with battery mounting blocks removed |
Motor Size: | 3660 |
Motor Type: | Non-Sensored Brushless 3200Kv |
Pinion: | 15T |
Radio: | Spektrum STX2 2-channel |
Servos: | Waterproof, metal gear |
Shock Type: | Coil-over-oil, Molded Composite |
Size/Scale: | 1/8 |
Speed Control: | BLX100, Waterproof, IC5 connector |
Spur Gear: | 57T |
Suspension: | Independent |
Tire Diameter: | 4.60 in (117mm) |
Tire Tread: | 2-HQ |
Vehicle Type: | Buggy |
Water-Resistant: | Yes |
Weight: | 5.68 lb (2.58kg) |
Wheel Diameter: | 3.37 in (83mm) |
Wheel Hex Size: | 17mm Hex |
Wheel Type: | 1/8th Buggy, 17mm Hex |
Wheelbase: | 12.91 in (328mm) |
Width: | 12.05 in (306mm) |
ARRMA 차량 참고사진
우선 저희 제품 이용을 해주셔서 감사의 말씀 드립니다.
이 퀵 가이드는 숙련자용이 아닌 기본적으로 처음 입문 또는 저희 제품을 처음 이용하시는 분들께
도움이 되고 자 제작된 매뉴얼입니다. 제품마다 차이가 있음을 미리 안내 드리며 용어는 공통으로 사용되는
경우가 많으니 참고 하시면 되겠습니다.
우선 저희 호라이즌 제품은 Team Losi / Vaterra / ECX / ARRMA / AXIAL 제품군으로 이루어 져 있습니다.
각각 조종기는 Spektrum 과 ECX 제품 그리고 TACTIC 으로 이되어있습니다. 공통적으로 사용되는 조종기 기준으로 설명 드리겠습니다.
RTR 기준 제품 박스 내에 제품의 본체 – 조종기 – 액세사리 가 구성 되어있습니다.
1.차량에 주 배터리 를 장착 합니다. / 조종기에는 AA 배터리를 하단부에 장착 합니다\
2.차량의 컨넥터를 연결 합니다.
3.전원을 켜기에 앞서 조종기를 먼저 켭니다.
4.조종기에 TH Trim / ST Trim 을 눈금을 확인 하여 중간에 맞춰 놓습니다.
5.그후 차량을 켭니다. 켜신후 약 2~3초 대기해주세요 (변속기 및 자이로 초기화 시간)
6.그후 자이로 및 조향 방향 전후진 방향을 확인 합니다.
7.즐거운 주행을 하시면 됩니다.
조종기 조절 스위치
TH Trim – 전후진의 중립부분 미세 조절합니다. (무조건 중간에 설정합니다.)
ST Trim – 좌우 조향의 중립을 미세 조절합니다. (직진시 한쪽으로 흐르지 않게 조절합니다.)
Reverse 스위치 TH/ST – 조종의 방향을 변경합니다 좌우 또는 전후진의 방향
ST D/R , TH D/R – 조향 의 타각량 조절 또는 전후진의 속도 조절을 합니다.
BIND – 차량과 조종기의 주파수적인 부분을 연결시 사용합니다 (일반적으로 사용하지 않습니다.)