2016 NEW
- All-new aluminum backbone
- All-new chassis
- All-new aluminum front & rear bulkheads
- All-new aluminum 2-speed bulkheads
- All-new aluminum front & rear upper clamps
- All-new aluminum front upper arm holders
- All-new front middle shaft holder
- All-new graphite radio plate & Multi-Flex™
- All-new aluminum radio plate mounts
- All-new muffler mounting
- All-new fuel tank & mounting system
- All-new aluminum engine mounts
- All-new aluminum front & rear lower suspension mounts
- All-new graphite rear upper suspension mounts
- All-new front lower suspension pivot pins
- All-new rear upper & lower suspension pivot pins
- All-new front lower arm
- All-new aluminum extension for steering block
- All-new aluminum steering servo mounts
- All-new graphite & steel extensions for shocks (lower suspension arms)
- All-new graphite front & rear shock towers
- All-new shock ball joints for improved up- and down-travel
- All-new rear solid axle shaft & pulley
- All-new front anti-roll bar wire
- All-new front aluminum body posts
- All-new graphite belt tensioner holder
- All-new pinions
GENERAL
- Developed, designed, and styled by Martin Hudy, manufactured exclusively by XRAY in Europe in the world's most sophisticated RC manufacturing facility
- Pure racing design, premium luxury quality, highest performance
- Premium, exclusive, and high-tech materials used throughout
- All-new aluminum backbone
- Unique, super-strong composite materials with XRAY's self-developed secret compound mixtures for suspension and drivetrain parts
- Super-low CG 1/8 on-road car platform
- Easy-access to drivetrain parts for super-quick rebuilds and set-up changes
CHASSIS
- All-new aluminum main frame & backbone
- High-precision CNC-machined aluminum bulkheads, suspension holders, and chassis
- Lightest & strongest support framework with maximum flex characteristics for increased traction
- CNC-machined 5mm Swiss 7075 T6 aluminum chassis
- Super-narrow chassis increases chassis flex, generates more traction and steering
- Smooth chassis underside with countersunk fasteners, chamfered edges to prevent contact during cornering
- Special chassis openings machined at front & rear of chassis for graphite stiffeners and additional weights
- Strategic chassis cut outs for optimized flex characteristics, centric engine mount holes for improved flex
- Chassis features pre-drilled holes for additional weights for optimum car balancing. Centerline holes are pre-drilled for easy balancing with the HUDY Chassis Balancing Tool #107880.
- All-new CNC-machined Swiss 7075 T6 aluminum bulkheads provide improved stiffness & flex characteristics for better steering characteristics, give easy access to all parts. Integrated front & rear belt tension adjustment. Incorporated muffler mount in left front bulkhead eliminates negative flex influence.
- All-new CNC-machined Switt 7075 T6 aluminum rear 2-speed shaft bulkheads, separate from rear bulkheads to give proper flex and maximum traction.
- New alum front & rear upper clamps, re-designed to fit new aluminum bulkheads. Front clamps hold the front shock tower, front upper arm mount; rear clamps hold rear shock tower, graphite upper arm holders.
- New alum front upper arm holders designed to work with the new aluminum bulkheads, and provide optimal flex adjustment. Easy position adjustment for increased caster angle and improved cornering speed.
- New alum middle shaft holder work re-designed to work with new aluminum bulkheads, acts as belt tensioner for the front & side belts.
- CNC-machined 2.5mm graphite radio plate re-designed to work with new aluminum bulkheads, new fuel tank, new steering servo mounting system. Quick & easy removal for servicing and cleaning.
- Radio plate flex is adjusted independently from chassis flex, using either fixed or flex bushing.
- New radio plate alum mounts were re-designed to fit into the new aluminum frame. Lightweight mounts give improved flex characteristics and durability.
- Low-profile narrower 125cc fuel tank gives for improved fuel movement, ensuring more stable & consistent engine operation at lower fuel levels. Hypertonic tank lid and internal stone-type filter is positioned in the center of the car and sits as low as possible.
- Re-designed fuel tank mounting atop the radio plate on alum posts with rubber grommets for easier insertion & removal from the car, allows better cleaning and maintenance
- Low-CG battery pack holder located beneath the fuel tank. Optional graphite with integrated Multi-Flex Technology™ functionality. Optional brass battery holder adds weight to the bottom of the car.
- Unique compact lightweight radio case with clean design and internal layout for receiver and optional on-off switch
Suspension
- Advanced suspension geometry precision engineered and finely tuned for high-competition racing
- Lightweight, durable, and reinforced suspension parts molded from XRAY's self-developed composite mixture for suspension parts. Each suspension part is molded from a high-tech composite that is specially formulated for the particular part.
- All-new CNC-machined Swiss 7075 T6 front & rear suspension holders, fully independent from the bulkheads, mounted directly to the chassis to increase traction and make the car easier to drive.
- All-new rear upper arm holders, machined from 3.5mm graphite material for optimized flex characteristics.
- New suspension extensions for optimized shock mounting position. Front graphite extensions, rear alum extensions.
- Highly-polished, high-tensile steel suspension pivot pins give smooth suspension action, now feature machined groove for better affixing by setscrew
- I.S.S. (Integrated Suspension Settings™) for fully integrated adjustment possibilities.
- Full suspension adjustment via square eccentric bushings in front upper and rear upper/lower bulkheads.
- Tiny, tough steering blocks made from special composite mixture have 0° kingpin (+1° and -1° kingpin steering blocks optionally available). Accommodates graphite aerodynamic disks.
- Re-designed alum steering block extensions for new Ackermann geometry and improved steering characteristics.
- Small, robust rear uprights feature two easily-adjustable upper roll center positions for traction adjustment. Uprights feature two body mounting adjustment positions to use different body types. Accommodates graphite aerodynamic disks.
- Concentric & eccentric bushings in front steering blocks & rear uprights allow easy adjustment of roll center, caster, wheelbase, and axle height
- Easily-adjustable wheelbase & weight balance and caster adjustment via positioning clips
- Newly-designed front arms accommodate new front wire anti-roll bar system
- Choice of front anti-roll bar systems: wire or blade-type (both included)
- Rear wire anti-roll bar supported by ball-bearings
- Optional front & rear anti-roll bar wires available for fine tuning
- Premium Hudy Spring Steel™ adjustable turnbuckles with stiff core
- Precision-ground steel pivot balls included for robustness and enhanced lifespan; optional lightweight aluminum and titanium pivot balls available
- Strong M10 composite nuts for minimal weight and smooth pivot ball movement
- Front steering block & rear uprights feature concentric and eccentric bushings which allow roll center adjustment as well as positive caster adjustment in front. Rear upright eccentric bushings allow independent wheelbase & axle height adjustment.
Engine & Clutch
- Newly re-designed engine mounts have improved mounting & better flex characteristics.
- Quick-set aluminum engine mount system with fixed engine position for super-easy engine installation and gear mesh adjustment
- Easily-adjustable 3-shoe XCA (XRAY Centrifugal-axial) clutch with 4-bearing clutchbell for superior durability, smooth & fast acceleration, increased clutch shoe lifespan
- Clutchbell, clutch nut, flywheel nut, thrustbearing collar manufactured from special HUDY Spring Steel™ for maximum lifespan and durability
- Hardcoated flywheel, clutch dis, spring cup manufactured from premium Swiss 7075 T6 aluminum
- Clutchbell / pinion gear construction allows super-precise assembly
- All-new Swiss 7075 T6 machined pinion gears, specially designed for 1/8 on-road, for greatly improved strength and durability. Pinion gear teeth are individually machined on a high-precision gear production machine; special hardcoating ensures maximum life Carbide axial thrust-bearing and high-tensile spring
Brakes:
- Strong, highly-efficient brake system
- Laser-cut, precision flat-ground ventilated steel brake disk with extra-deep machined grooves for light weight and exceptional heat dissipation, maximum braking efficiency and super-smooth braking action; strategically-placed ventilation holes ensure minimal brake pad wear and super-true, wobble-free rotation
- High-grip brake pads are specially bonded to laser-cut steel backing plates
- Brake disk and brake backing pads are heat-treated for maximum performance and lifespan
- Special return springs ensure proper gap between brake pads
- CNC-machined 7075 T6 aluminum brake cam is ball-bearing supported for super smoothness and precise brake control
Drivetrain
- Smooth and efficient 1/8 on-road drivetrain
- Ultra-smooth, highly-efficient belt/pulley drivetrain with super-low rotating mass
- Re-designed front middle shaft holder offers easy front belt & pulley access and easier maintenance
- Exclusive use of HUDY Spring Steel™ in drivetrain parts gives highest performance and unmatched lifespan
- High-performance HUDY Spring Steel™ front CVD drive shafts; rear dogbone-style HUDY Spring Steel™ drive shafts
- Super-lightweight wheel axles & axle outdrives are CNC-machined from HUDY Spring Steel™
- PUR®-reinforced high-efficiency, low-friction, fine-pitch drive belts
- Pulleys molded from super-low friction composite material for extra-long lifespan, pulley covers feature self-cleaning holes
- Complete set of high-speed, blue-sealed ball-bearings, degreased, lightly oiled with Aero Shell Fluid 12™ for maximum drivetrain efficiency
- New graphite side-belt tensioner re-designed to work with new alum frame. Easy belt adjustment , easy removal.
2-Speed Transmission:
- Superior, robust 2-speed transmission with small & light gears, excellent bottom-end power & acceleration
- Small & lightweight gear carrier, alu drive flange with 1-way bearing
- Small & lightweight gears from well-proven NT1 for fast acceleration and low rotating mass
- Precision-manufactured, super-smooth lightweight hollow middle layshaft made from tough HUDY Shaft Steel, specially heat treated for extra strength and long life
- High-quality 1-way bearing hand-ground for maximum running precision and strength
- 2-speed spur gear adapter CNC-machined from Swiss 7075 T6 for precision fitment of 1-way bearing, allowing super-precise and wobble-free spur gear installation
- World's most precise spur gears molded from special composite mixture ensures wobble-free running and eliminates run-out
- 2-speed gearbox shoes molded from special composite mixture
Axles:
- All-new rear solid axle & pulley re-designed to work with new aluminum bulkheads
- Front super-lightweight one-way axle made from Swiss 7075 T6 alum for super-low rotating mass and low CG
- Rear axle made from HUDY Spring Steel™ with composite lightweight axle pulley
- One-way outdrives manufactured from HUDY Spring Steel™ and specially ground for maximum precision
SHOCKS:
- Re-designed shocks achieve maximum traction and steering, optimized up & down travel
- Shock pistons with 2- and 3-hole designs and 1.0/1.1/1.2mm holes, made from special Delrin™ material to ensure extreme roundness and extra-smooth damping
- CNC-machined shock bodies made from Swiss 7075 T6 aluminum, externally fine-threaded for precise ride height adjustment
- Low-profile internal membranes for super-smooth, precise damping
- Specially-hardened, polished shock shafts for maximum strength and ultra-smooth operation
- XRAY self-developed and manufactured racing springs are hand-selected and tested for maximum precision, equal length, and equal damping characteristics
- New re-designed compact front & rear CNC-machined premium 3.0mm graphite shock towers
Steering:
- All-new CNC-machined Swiss 7075 T6 alum steering servo mounts, re-designed to work with new radio plate
- New servo saver shaft & server saver pivot shaft, re-designed to work with new improved higher roll center radio plate.
- Centralized servo saver is ball-raced for super-precise, smooth operation
- Adjustable spring preload tension
- Easily-changed Ackermann positions
Shocks:
- New longer shock ball joints to work with new shock geometry, optimized up- & down-travel
- Redesigned longer shock bodies accommodate longer shock shafts and new shock pistons
- Shock pistons with 2- and 3-hole designs and 1.0/1.1/1.2mm holes, made from special Delrin™ material to ensure extreme roundness and extra-smooth damping
- CNC-machined shock bodies made from Swiss 7075 T6 aluminum, externally fine-threaded for precise ride height adjustment
- Low-profile internal membranes for super-smooth, precise damping
- Specially-hardened shock shafts for maximum strength
- XRAY self-developed and manufactured racing springs are hand-selected and tested for maximum precision, equal length, and equal damping characteristics
- Re-designed compact front & rear CNC-machined graphite shock towers (2.5mm front, 3.0mm rear) with new shock mounting positions
- XRAY Premium Silicone Oils are included. Manufactured in Europe by a specialized premium silicone oil manufacturer, each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality batch-to-batch. Based on the industry-standard cSt rating.
Body & Wheels:
- New CNC-machined high-strength graphite aerodynamic disks improve both low & high-speed steering, improve rear traction, and improve stability in high-speed corners.
- New front body posts, CNC-machined from Swiss 7075 T6 alum, additionally lightened for minimal weight.
- Special composited rear body mount features 3 positions for rear upright downforce adjustment
- Tough composite rear body mount holder allows mounting of all popular racing bodies and meets all EFRA rules.
Assembly & Support
- Premium 3D full-color Instruction Manual is included
- Comprehensive Set-up Book is available online as a free download
- Exclusive Virtual Online Set-up Sheet database with thousands of set-up sheets for race tracks around the world
- Premium, unmatched XRAY online support
Adjustment Possibilities
- Fully-adjustable front and rear suspension geometry: caster, camber, toe, ride height, droop, wheelbase, track-width, roll centers, axle height, wheel offset
- Adjustable front & rear roll centers
- Adjustable belt tension via bulkhead inserts, side belt tensioner, front middle shaft holder position
- Adjustable HUDY Spring Steel™ turnbuckles (steering, servo, rear upper links)
- Adjustable Ackermann positions
- Front & rear upper and lower shock mounting locations
- Adjustable alu racing shocks
- Adjustable front anti-roll bars, blade or wire type
- Adjustable wire-type rear anti-roll bar
- Adjustable weight balance
All specifications are subject to change without prior notice. Pre-production prototype is shown, final specifications may slightly vary. In some pictures optional parts may be shown. All option parts are not included and must be purchased separately. The color of some aluminum parts may vary from kit to kit and some of the kits may not include all the orange or black parts as shown. Some of the spare parts or option parts may not be available at the moment in the orange or black color as shown.
50,000원 이상 주문시 무료배송! (단, 50,000원 미만 주문시 배송료 3,000원이 추가됩니다.)
- RC용품 제조사 A/S규정안내
- 변속기,배터리,모터,수신기 킷트 등의 모든 RC용품은 제조사의 공장 출고시 불량을 제외한 어떠한 경우에도 제조사의 규정에 의해 일체 교환 및 무료 A/S는 불가합니다. (알씨마을의 규정에 의한 것이 아니니 이점 이용에 참고하시기 바랍니다.)
- 최초 불량이 아닌 사용중 파손시 고객님께서 직접 수리 및 부품교환을 하셔야 하나 수리가 어려울 경우 알씨마을로 문의 주시면 부품 + 공임(공임은 작업량에 따라 약 1만~5만원)으로 유료 A/S(수리)를 해드릴 수 있습니다.
- 제 1 조 알씨마을의 부담으로 재배송 또는 반품, 교환, 환불해 드리는 경우
- 1. 주문한 상품과 다른 상품을 배송한 경우
- 2. 주문한 상품의 수량과 수령한 상품 수량이 다를 경우
- 3. 상품의 파손 손실된 상품을 배송한 경우
- 4. 상품(택배)을 받지 못했을 경우
- 제 2조 고객께서 비용을 부담 하셔야 하는 경우
- 1. 고객님의 변심으로 반품, 교환을 원하는 경우(단, 개봉한 상품은 불가)
- 2. 주문시 배송지 주소를 잘못 기입하여 배송받지 못한 경우
- 3. 주문시 호환여부를 잘못 판단하여 사용할 수 없는 상품을 주문한 경우
- 4. 수령한 상품을 사용중에 부품이 파손된 경우
- 5. 수령한 상품을 사용중 초기셋팅값을 변경하여 시동 또는 작동이 되지 않을시 유선상 처리가 불가한 경우
- 제 3 조 기타 유의 사항 안내
- 1. 알씨마을 쇼핑몰의 상품상세정보는 실제 상품정보와 약간의 차이가 있을 수 있습니다.
- 2. 옵션 상품등 호환되는 상품 주문시 꼼꼼히 호환여부를 확인 후 주문하시기 바랍니다.
- 3. 파손된 상품 또는 불량에 대한 이의 제기는 택배수령후 3일 이내에 하셔야 합니다.
- 4. 개봉한 상품은 반품, 교환되지 않습니다.
- 5. 반품, 교환시 배송중 파손될 경우 그 손해는 고객님께서 부담하셔야 합니다.
- 6. 구매자의 사용 미숙으로 발생한 신체 또는 재산상의 손해에 대하여 일체 책임 지지 않습니다.
