Features
- Includes 3 channel radio system, ESC and transmitter batteries
- Includes motor and on-board LiPo battery
- Realistic narrow-stance rock crawler body in olive green or red
- Molded roll cage with realistic light bar
- Realistic driver figure and many other scale details
- Officially licensed KMC XD229 Machete Crawl wheels
- Officially licensed Nitto Trail Grappler M/T tires (S30 compound, large block tread)
- Full-time 4WD
- Splined and sleeved front and rear drive shafts allow for maximum suspension travel while keeping the power to the wheels
- Steel front and rear axles, front stub axles and dogbones provide strength and durability
- Rugged steel C-channel frame rails with bracing keep everything rigid and aligned
- Front and rear axles consist of a two-piece, molded plastic solid axle design
- 3-Link front and 4-link rear suspension supply optimal handling
- Coil-over shocks with simulated reservoir and durable plastic suspension links deliver proven Axial crawling performance
- Front and rear differentials each house a worm gear setup to power the axles and create higher ground clearance. Worm gear drive also provides a low gear ratio to reduce torque twist
- Two LEDs in the front bumper for night driving
- Nothing! Everything you need to begin having fun with your 1/24 scale Deadbolt is included!
- (1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
- (1) Axial AE-6 ESC/receiver combo (installed)
- (1) Dynamite® 88T brushed electric motor (installed)
- (1) Axial AS-1 steering servo (installed)
- (1) Axial® AX-4 2.4GHz 3-channel radio
- (4) AA transmitter batteries
- (1) 350mAh 2S 7.4V LiPo battery
- (1) USB LiPo charger
- (1) Product Manual
Overview
The SCX24™ Deadbolt™ 4WD is the first Axial® off-roader in 1/24 scale. At less than 8" long, it's the perfect rig to take along on your hiking, camping, and other outdoor and indoor adventures — offering factory-assembled ease, scale looks, and confident handling on any trail.
Even new modelers driving the SCX24 chassis will be well-equipped to tackle tough climbs and rough trails. Like the larger SCX10™ chassis, this smaller version uses plenty of steel components — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert terrain, it has the strength to keep pushing onward and upward.
For the most reliable handling, the SCX24 chassis features a three-link front and four-link rear suspension. The combination of coil-over shocks and durable plastic suspension links delivers Axial-worthy crawling performance even at this small scale. The worm gear drive setup permits a high ground clearance plus a low gear ratio that reduces torque twist.
Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt shows off competence and charisma on the trails. Check out that Deadbolt body — with its narrow stance, bulging hood, realistic driver figure, and molded roll cage with realistic light bar. The realism continues right down to the ground, where you'll find licensed KMC XD229 Machete Crawl wheels wrapped in Nitto Trail Grappler tires.
Adding even more to its beginner appeal, the SCX24 Deadbolt comes 100% complete and ready to run. Everything required for action is in the box: assembled and finished vehicle; Axial 3-channel 2.4GHz radio system with servo and ESC/receiver unit; Dynamite® 88T brushed electric motor and 350mAh 2S 7.4V LiPo battery; USB LiPo charger; and even four AA cells for the transmitter!
| Approximate Assembly Time: | No assembly required |
| Batteries: | 7.4V 350mAh 30C LiPo |
| Body: | Painted and trimmed Axial Deadbolt |
| Charger: | USB LiPo charger |
| Chassis: | Stamped steel rails |
| Completion Level: | Ready-To-Run |
| Differential: | Worm gear 16T/4T |
| Drivetrain: | 4WD |
| Ground Clearance: | 1.06" (27mm) |
| Height: | 4.73" (120.2mm) |
| Length: | 7.8" (199.5mm) |
| Motor Size: | 180 |
| Motor Type: | Brushed |
| Pinion: | 10T |
| Radio: | AX-4 2.4GHz 3-channel |
| Servos: | AS-1 steering servo |
| Shock Type: | Plastic body coil-over .9 - 1.3" (24 - 33.4mm) |
| Size/Scale: | 1/24 |
| Speed Control: | AE-6 ESC receiver/combo |
| Spur Gear: | 55T |
| Suspension: | Solid axle, front and rear |
| Tire Diameter: | 2.0" (51mm) |
| Tire Tread: | Nitto Trail Grappler M/T, large block tread |
| Track: | 3.9" (99.5mm) |
| Vehicle Type: | Crawler |
| Water-Resistant: | No |
| Weight: | 0.5lb (0.22kg) |
| Wheel Diameter: | 1.0" (26mm) |
| Wheel Type: | Black Plastic Licensed KMC XD229 Machete Crawl |
| Wheel Width: | 0.48" (12.4mm) |
| Wheelbase: | 5.25" (133.5mm) |
| Width: | 3.9" (99.5mm) |
STEEL C-CHANNEL CHASSIS FRAME RAILS
Just like the 1/10th scale SCX10™ platform, the SCX24™ chassis features rugged and sturdy steel c-channel frame rails with bracing to keep everything intact and aligned.
DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor provides the right amount of torque to help ascend steep climbs. It's mated to a steel motor mount to keep flex to a minimum, which helps protect the gears.
WORM GEARS
The front and rear differentials each house a worm screw and worm gear setup to get the power to the axles and create higher ground clearance.
DURABLE STEEL AXLES
Steel front and rear axles, front stub axles along with steel dogbones provide strength and durability to keep things running during tough climbs and rough trails.
SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.
COILOVER SHOCK ABSORBERS
Even at this small scale, the combination of coilover shocks with simulated reservoirs and durable plastic suspension links delivers the crawling performance you've known and expect from Axial.
FRONT AND REAR SOLID AXLES
The front and rear axles consist of a two piece, molded plastic solid axle design. For optimal handling, the SCX24™ suspension features a three-link front and four-link rear setup.
LED LIGHTS INCLUDED
Two bright LED lights are included and are mounted in the front bumper. An extra LED light port on the ESC allows you to add optional LED lights.
4-LINK REAR SUSPENSION
The suspension geometry utilizes a 4-Link design for the rear which is optimized to reduce axle steer and torque twist. We've also included extra suspension links for adjusting your wheelbase length.
KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Officially licensed KMC XD Machete wheels are legendary in the off-road world. They are molded in black and feature stunning scale details, despite the small scale.
The officially licensed Nitto Trail Grappler M/T Tires offer a fantastic blend of off-road performance while still retaining excellent composure for on-road use.
HINGED BODY SYSTEM
The hinged body system offers easy access to on-board components. You can quickly reach the battery and chassis by removing just two body clips and swinging the body up.
FULL BALL BEARINGS
Just because the SCX24™ is smaller in size doesn't mean the features need to follow suit. No bushings found here, instead the drivetrain is freely spinning on sealed cartridge bearings throughout the entire vehicle.
AXIAL AS-1 SERVO
Mounted just above the front axle is the Axial AS-1 servo, with a servo saver that allows for steering accuracy, while also providing protection for the servo gears in the event of a bind or impact.
50,000원 이상 주문시 무료배송! (단, 50,000원 미만 주문시 배송료 3,000원이 추가됩니다.)
- RC용품 제조사 A/S규정안내
- 변속기,배터리,모터,수신기 킷트 등의 모든 RC용품은 제조사의 공장 출고시 불량을 제외한 어떠한 경우에도 제조사의 규정에 의해 일체 교환 및 무료 A/S는 불가합니다. (알씨마을의 규정에 의한 것이 아니니 이점 이용에 참고하시기 바랍니다.)
- 최초 불량이 아닌 사용중 파손시 고객님께서 직접 수리 및 부품교환을 하셔야 하나 수리가 어려울 경우 알씨마을로 문의 주시면 부품 + 공임(공임은 작업량에 따라 약 1만~5만원)으로 유료 A/S(수리)를 해드릴 수 있습니다.
- 제 1 조 알씨마을의 부담으로 재배송 또는 반품, 교환, 환불해 드리는 경우
- 1. 주문한 상품과 다른 상품을 배송한 경우
- 2. 주문한 상품의 수량과 수령한 상품 수량이 다를 경우
- 3. 상품의 파손 손실된 상품을 배송한 경우
- 4. 상품(택배)을 받지 못했을 경우
- 제 2조 고객께서 비용을 부담 하셔야 하는 경우
- 1. 고객님의 변심으로 반품, 교환을 원하는 경우(단, 개봉한 상품은 불가)
- 2. 주문시 배송지 주소를 잘못 기입하여 배송받지 못한 경우
- 3. 주문시 호환여부를 잘못 판단하여 사용할 수 없는 상품을 주문한 경우
- 4. 수령한 상품을 사용중에 부품이 파손된 경우
- 5. 수령한 상품을 사용중 초기셋팅값을 변경하여 시동 또는 작동이 되지 않을시 유선상 처리가 불가한 경우
- 제 3 조 기타 유의 사항 안내
- 1. 알씨마을 쇼핑몰의 상품상세정보는 실제 상품정보와 약간의 차이가 있을 수 있습니다.
- 2. 옵션 상품등 호환되는 상품 주문시 꼼꼼히 호환여부를 확인 후 주문하시기 바랍니다.
- 3. 파손된 상품 또는 불량에 대한 이의 제기는 택배수령후 3일 이내에 하셔야 합니다.
- 4. 개봉한 상품은 반품, 교환되지 않습니다.
- 5. 반품, 교환시 배송중 파손될 경우 그 손해는 고객님께서 부담하셔야 합니다.
- 6. 구매자의 사용 미숙으로 발생한 신체 또는 재산상의 손해에 대하여 일체 책임 지지 않습니다.
