HPI and Kraken RC bring you the best of both worlds!

Experience the Baja 5B like never before—fully loaded and wrapped in a hard-core Kraken Roll cage, just like the full scale racers. Fit a fully built and painted Baja 5B with a Kraken RC roll cage and you get one of the coolest, meanest RC vehicles around. A classic sand rail and a TSK-b Class 1 are both available with a fully functional polymer roll cage and polycarbonate body panels from Kraken RC. Either vehicle delivers the pounding power of the Baja 5B—equipped with a driven HPI Fuelie K26 engine and ready to take on the sands. They’re also armed with the latest heavy duty suspension and drivetrain components for maximum off-roading.

Features:

• Factory-assembled RTR large scale gas buggy
• Fully functional modular polymer roll cage
• Custom, pre-painted polycarbonate body panels
• Heavy duty 24mm front hex hubs
• Super HD driveshafts
• Single piece rear hub
• TF-45 2.4GHz FHSS radio system with failsafe
• Powerful pull start 26cc 2-stroke engine
• 4mm Aluminum monocoque chassis
• 700cc fuel tank for up to 45 minute runs
• High flow tuned muffler
• Sand rail fitted with off-road tires
• TSK-b Class 1 buggy fitted with HB Rodeo SC tires
• 6V, 3000mAh receiver pack with wall charger
• Big bore shocks with 6mm diameter shafts
• 8000 RPM performance clutch
• Full ball bearings

Specifications:
Chassis: 0.16" (4mm) pressed aluminum channel monocoque design with modular polymer roll cage
Drive: Two wheel, steel dogbones with rubber boots, super heavy duty driveshafts, one-piece rear hub for increased durability
Differential: Metal gear
Engine: HPI fuelie K26 2-stroke gasoline engine with pull starter
Muffler: High-flow tuned
Fuel Tank: 24oz (700cc)
Radio: 3-ch HPI TF-45 2.4GHz FHSS radio system with failsafe
Servos: SFL-11MG metal gear servo 347 in/oz torque @ 6V, speed, 0.17 seconds/60°, SF-20W throttle servo
Body: Pre-painted custom polycarbonate body panels
Shocks: Big Bore valve variable control with 6mm diameter shafts
Receiver Pack: 6V 3000mAh NiMH
Ball Bearings: Full set
Wheels: Front 4.7 x 2.4" (119 x 61mm), rear 4.7 x 3" (119 x 76mm) with beadlock mount
Tires: HB Rodeo SC
Wheelbase: 22.5" (571mm)
Ground Clearance: 2.4" (61mm)

Includes:

• Baja 5B TSK-b Class 1 Buggy w/Kraken RC Sidewinder X5 Conversion
  
• K26 Gasoline Engine
  
• 2.4GHz 3-ch Radio
  
• Steering & Throttle Servos
  
• 100cc bottle of 2-Stroke Oil
  
• RX Battery
  
• Instruction Manual

Needed To Complete:

• Gasoline