- NOVAK BRUSHLESS CONVERSION KITS for CEN MATRIX  (엔진 -> 전동으로 컨버젼)

- 엔진버기를 브러쉬리스 전동버기로 컨버젼하기 위해 필요한 컨버젼 키트

- 모터 마운트(쿨링팬), 배터리 박스, 배터리 박스 스트랩, 안테나 마운트 등 기타 부품이 포함되어 있습니다.

- 550 사이즈의 브러쉬리스 모터 및 변속기와 MOD 1 피니온기어(엔진차량 스퍼에 맞는....)를 사용하시면 됩니다. (별매)

- 컨버젼 후의 사진 입니다. (차체 및 브러쉬리스 모터 + 변속기 미포함)

CLEAN UP AND GO BRUSHLESS

Plan an intervention with your 1/8-scale nitro vehicle, and admit it into electric rehab. Novak has the ideal program to convert your 1/8-scale nitro off-road vehicle into an efficient brushless electric machine by offering ten, inclusive Brushless Conversion Kits (#5010 - #5019). With some basic assembly, a 1/8-scale nitro car can be converted into a leaner, cleaner, less noisy brushless car with faster acceleration and speeds comparable to nitro. The Novak Brushless Conversion Kits were designed specifically for Novak’s 550-size, HV-Series brushless motors and include all of the necessary conversion components. So clean up, and reinvent your car as brushless!

WHY CONVERT YOUR NITRO TO BRUSHLESS?

1/8-scale buggies are built strong, handle well and are fun to race. With the increased popularity of brushless, R/C enthusiasts can experience a new way to drive and race while enjoying the many benefits of brushless.

• Better Performance. Novak sensored-brushless motors provide extraordinary throttle response and controllability, and better acceleration and low-end feel. This translates to better control on bumpy courses and makes clearing jumps easier. Brushless motors also operate consistently in varying weather conditions, so you don’t have to be a tuning expert.
• Lower Center of Gravity. Electric conversion provides a lower center of gravity for more agile and nimble handling. The weight of a converted vehicle is comparable to a nitro setup.
• Less Maintenance. Brushless systems are virtually maintenance-free. No engines to tune or rebuild and no spilled nitro fuel to clean up, so more time can be spent racing or bashing.
• Cleaner Environment. Brushless motors are far cleaner to run than nitro-powered vehicles and are healthier for indoor racing.
• Quieter. Brushless-powered cars are quieter than nitro-powered vehicles and will allow 1/8-scale buggies to run where noise restrictions are imposed.
• Plug and Play. With a brushless-powered system, just turn on the switch and go. No engines to start, tune or warm up.

TEN CONVERSION KITS AVAILABLE

Ten conversion kits are available for many popular 1/8-scale off-road nitro vehicles:
 

Novak Conversion Kits		Kit Compatibilty	Download Vehicle Specific Sheet	Pinion Gear Recommendations Two 2S Li-Po Packs
	Associated® RC8™ (#5010)	Team Associated RC-8 Buggy	Converted Associated Diagram	Motor* Mod 1 Pinion Gear HV5.5 11T Novak #5100 HV6.5 13T Novak #5102 HV7.5 15T Novak #5104
	CEN® Matrix™ (#5011)	CEN Matrix C-1 Buggy	Converted CEN Diagram	Motor* Mod 1 Pinion Gear HV5.5 Not Recommended HV6.5 11T Novak #5100 HV7.5 13T Novak #5102
	Hot Bodies® Lightning™ (#5012)	Hot Bodies Lightning2 Evo Pro Buggy	Converted Hot Bodies Diagram	Motor* Mod 1 Pinion Gear HV5.5 10T Novak #5110 HV6.5 11T Novak #5100 HV7.5 12T Novak #5101
	Kyosho® Inferno™ (#5013)	Kyosho Inferno 777, 777 SP-1, SP-2 and SP-2WC Buggies	Converted Kyosho Diagram	Motor* Mod 1 Pinion Gear HV5.5 10T Novak #5110 HV6.5 11T Novak #5100 HV7.5 12T Novak #5101
	Mugen® MBX5™ (#5014)	Mugen MBX5 and MBX5R Buggies	Converted Mugen Diagram	Motor* Mod 1 Pinion Gear HV5.5 10T Novak #5110 HV6.5 11T Novak #5100 HV7.5 12T Novak #5101
	OFNA® 9.5™/Ultra™ (#5015)	OFNA 9.5 Series Buggies (ViolatorTM, RavengerTM and Jammin X1TM) and the OFNA Ultra Series Buggies (MBXTM, CompTM and LX1TM)	Converted OFNA 9.5 Diagram	Motor* Mod 1 Pinion Gear HV5.5 10T Novak #5110 HV6.5 11T Novak #5100 HV7.5 12T Novak #5101
	OFNA® Hyper 8™ (#5016)	OFNA Hyper 8 and Hyper 8.5 Buggies	Converted OFNA 8 Diagram	Motor* Mod 1 Pinion Gear HV5.5 10T Novak #5110 HV6.5 11T Novak #5100 HV7.5 12T Novak #5101
	OFNA® Hyper 7™ (#5017)	OFNA Hyper 7 Buggies	Converted OFNA 7 Diagram	Motor* Mod 1 Pinion Gear HV5.5 10T Novak #5110 HV6.5 11T Novak #5100 HV7.5 12T Novak #5101
	XRAY® XB8™ (#5018)	XRAY XB8 TQ and XB8 EC Buggies	Converted XRAY Diagram	Motor* Mod 1 Pinion Gear HV5.5 10T Novak #5110 HV6.5 11T Novak #5100 HV7.5 12T Novak #5101
	Losi® 8ight™ (#5019)	Losi 8ight Buggy	Converted Losi Diagram	Motor* Mod 1 Pinion Gear HV5.5 10T Novak #5110 HV6.5 11T Novak #5100 HV7.5 12T Novak #5101
*HV4.5 motors are for speed runs only. Use the largest pinion gear available.

MOTOR PLATE COMPATIBILITY

If you don't see your vehicle kit listed above, click here to download Novak's motor plate templates to see which conversion kit will best fit your 1/8-scale vehicle.

Once downloaded, print out the motor plate template and use scissors to cut it out. The template is actual size, so if the motor holes/slots line up to your chassis, that's the motor plate to use to convert your 1/8-scale buggy.

If necessary, download each template until a compatible motor plate is found.

INCLUDED ITEMS

Novak Brushless Conversion Kits contain all of the necessary parts to completely convert a 1/8-scale nitro off-road vehicle into an energy-efficient brushless buggy.

• Motor heat sink (a) and buggy-specific heat sink adaptor plate (b), specifically designed for Novak’s 550-size, HV-Series of brushless motors. Motor assembly installs directly to chassis with a four-bolt mounting system for stability, optimal heat sinking and lower center of gravity.
• Two battery boxes (c) and adjustable straps (d) for holding an assortment of Li-Po or Ni-MH batteries
  

  Inside battery box dimensions: 140mm (5.51 in) long x 46mm (1.81 in) wide x 31mm (1.22 in) high A higher battery can be used if you use longer screws for the battery strap. Outside battery box dimensions: 145mm (5.71 in) long x 50mm (1.97 in) wide x 28mm (1.10 in) high

• Motor cooling fan (e) that bolts directly to motor heat sink
• Y-Harness (f) to connect the motor and ESC fans into the HV Brushless ESC
• Antenna mount
• Hardware kit
• Complete instructions

Brushless vehicles are a popular segment in the racing industry, so don’t get left behind in the nitro fumes, and join the brushless revolution!