Special Features:
Optimized operating software B6 Ultimate features the AUTO function that set the feeding current during the process of charging or discharging. Especially for Lithium batteries, it can prevent the overcharging which may lead to an explosion due to the user's fault. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the programs of this product were controlled through two way linkage and communication, to achieve the maximum safety and minimize the trouble. All the settings can be configured by users!

Internal independent lithium battery balancer
B6 Ultimate employs an individual-cell-voltage balancer. It is not necessary to connect an external balancer for balance charging.

Balancing individual cells battery discharging
During the process of discharging, B6 Ultimate can monitor and balance each cell of the battery individually. Error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal.

Adaptable to various type of lithium battery
B6 Ultimate is adaptable to various types of Lithium batteries, such as Li-ion, LiPo and the new LiFe series of batteries.

"Fast" and "storage" mode of lithium battery
Purposes to charge Lithium battery varies, fast charge reduce the duration of charging whereas store state can control the final voltage of your battery, so as to store for a long time and protect useful time of the battery.

Maximum safety
Delta-peak sensitivity: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery's voltage exceeds the threshold, the process will be terminated automatically.
Automatic charging current limit: You can set up the upper limit of the charging current when charging your NiCd or NiMH battery; it is useful for the NiMH battery of low impedance and capacity in the 'AUTO' charging mode.
Capacity limit: The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit, the process will be terminated automatically when you set the maximum value.
Temperature threshold*: The battery s internal chemical reaction will cause the temperature of the battery to rise. If the temperature limit is reached, the process will be terminated.
*This function is available by connecting optional temperature probe, which is not included in our package.
Processing time limit: You can also limit the maximum process time to avoid any possible defect.

Data store/load
The maximum five batteries data can be stored for users convenience. You can keep the data pertaining to program setting of the battery of continuous charging or discharging. Users can call out these data at any time without any special program setting.

Cyclic charging/discharging
1 to 5 cyclic and continuous process of charge>discharge or discharge>charge is operable for battery refreshing and Balancing to stimulate the battery s activity.

Multi-use wires
With Charger IMAX B6 Ultimate connectors are provided. You can charge and discharge your battery easily with these wires.
 

.

Input voltage:	11-18 V DC
Circuit Power:	Charge power 200 Watts. Max. Discharge power 25 Watts
Charge Current Range:	0.1~10A
Discharger Current Range:	0.1~5.0A
Current drain for balancing Li-Po/Fe::	200mA/Cell
Li-ion/Poly cells:	1~6 cells
Ni-MH/NiCd cells:	1~18 cells
Pb battery voltage:	2~24v(1~10cells)
Dimensions	150x116.5x53mm
Weight	607g

IMAX B6 Ultimate Charger XH Adaptor Temperature Probe Crocodile Clip Charging Cable 18AWG wire Charging Cable Charger Monitor Program Disk USD Cable Plug-in Battery Clamps English Manual