|
AlignRC T-Rex700E FLS Super Combo/ESC - R2!
- When Size Matters!! -
전세계 90급 시장을 석권한 ALIGN사의 최강의 90급 전동 머신 T-Rex700E FLS Super Combo Set!
2008~2010년 전세계 52,000대라는 경이적인 판매고를 기록한 세계적인 베스트 셀러 T-Rex700 Nitro의 전동버젼!
전 파트가 커스텀 사양으로 구성된 Full Metal, Full Carbon 으로 구성된 호화판 대형 전동헬기로 대단히 우수한 기동성 및 완벽한 밸런싱, 높은 완성도, 그리고 믿을 수 없는 경량화(4.7kg/Full Loading!!)로 90급 헬기 시장의 왕좌를 노리는 최 상위 클래스 전동헬기 입니다.
주의 : T-Rex700E FLS Super Combo는 전용 700M Motor/SJ Hawk-120A ESC 및 690D Rotor, 신형 DS610 Cyclic Servo(w/CNC aluminum servo horns) 및 FLS 3G Combo(Version.2.1)가 포함된 패키지 버젼입니다.
주의 : 국내 정식으로 수입되는 ALIGN사의 모든 Motor, ESC, Servo, Gyro는 전수 검사 후 출하되며 파쇄형 홀로그램 스티커가 붙어서 출하됩니다.
홀로그램 스티커가 없는 경우 A/S가 되지 않거나 유상수리 처리되므로 이점 양지말씀 드립니다.
(하기 이미지는 예제입니다.)
R2 버젼 부터는 Optional Hand Made Painted Canopy "Spider"가 기본 사양으로 포함됩니다.
Brand New! 국산 변속기의 자존심!
주의 : 본 패키지에는 SJ Propo사의 F3C/F3A 대응 High Voltage용 Hawk-120A 변속기가 기본 사양으로 포함되어 있습니다.
- All metal, highly precise main blade control system
- Version.2! 3G FLS Sysdtem
T-Rex700E R2부터는 3G FLS Version.2.1이 탑재 됩니다!
- New lateral adjustable metal left/right control bellcrank arms and elevator control arms
- New lightweight H-cross section electronic retention system
for protection, as well as ergonomically correct design to simplify operation for battery protection and easy use
- Top mounted motor base with unique fixed 3rd bearing block
- High efficiency shaft tail drive system, high precision bearinged push/pull control system, and high speed rated thrust bearings incorporated into tail blade grips
- 혁신적인 슬라이딩 방식의 배터리 마운팅 트레이
추락 시 배터리의 파손을 최소화 및 손쉬운 장착.
배터리는 별매입니다.
- Easy access top mounted ESC platform to take advantage of main blades airflow for effective cooling.
변속기는 별매입니다.
- 새롭게 디자인 된 4KW급 700M 모터 가본사양으로 탑재
- 필드에서 검증된 690D 카본 로터가 기본사양으로 탑재.
- DS610 Digital Servo 및 AL CNC Metal Servo Horn 포함!
- DS650 Digital Servo가 기본 사양으로 포함!
- 패키지 구성
Instruction!
●3-axis gyroscopic flybarless system to simulate the stability of mechanical flybar system, yet at the same time achieving agile 3D performance.
●Utilizes Silicon Micro Machine (SMM) sensors for excellent stability.
●12 bit processors providing ultra high resolution, resulting in highly precise controls
●Software upgradable through PC interface adapter
(sold eparately)
●Simplistic setup process without the need of external devices. Setup is done through 5 steps and 2 sensitivity adjustments. Rudder setup is identical to GP780 gyro, minimizing learning curve.
●Flybarless system dramatically improves 3D power output and efficiency, resulting in reduced fuel or electricity consumption.
●Highly sensitive gyroscopic sensors combined with advanced control detection routine providing higher hovering and aerobatic stability than other flybarless system.
●Suitable for all CCPM and mechanical mixing system.
●Comaptible with helicopter of all sizes from T-Rex 250 to T-Rex 700.
●Innovative Pitch Gau as an aid to facilitate pitch adjustments.
●High frame rate signal output for faster and higher precision servo response.
●Capable to operate between 3V to 8.4V, compatible with high voltage servos.
●Small footprint, light weight, minimalists and reliable design.
Specification(T-Rex700E)
●Features
1.All metal, highly precise main blade control system, with excellent durability and superior control precision.
2.Design concept based on large competition helicopters, for excellent static and dynamic performance.
3.New lateral adjustable metal left/right control bellcrank arms and elevator control arms, enabling the most ideal endpoint travel adjustment for 3G flybarless as well as flybar system, while increasing servo resolution for improved control precision.
4.Innovative sliding battery tray rails imbedded into the 3K side frames, allowing for quick battery access as well as battery protection. In addition, the system improves the overall rigidity of side frames, as the same time raising the center of gravity.
5.Top mounted motor base bringing the motor’s center of gravity much accurate, improving 3D agility and allowing blade drafts to cool the motor effectively.
6.Utilizing module 1 gear pitch for improved power sustainability of main gear.
7.Uniquely designed fixed motor mount with 3 bearing support blocks, providing absolute support for motor shaft, dramatically reducing gear mesh variance as result of instantaneous torque. In addition, this system strengthen the lack of support on high power outrunner motors, eliminating gear stripping issues, while increasing motor power transfer efficiency and main gear longevity.
8.Easy access top mounted ESC platform to take advantage of main blades airflow for effective cooling.
9.New lightweight H-shaped electric devices retention system for protection, as well as ergonomically correct design to simplify operation.
10.High grade painted fiberglass canopy with new 4 point anti-vibration mounting mechanism to simplify installation.
11.Wide +/- 15 degree pitch range for superior 3D performance and explosive power.
12.CNC twice-machined gear for superior balance and stability.
13.High speed rated thrust bearings incorporated into tail blade grips.
14.Utilizes high efficiency tail drive shaft system and high strength 3K carbon fiber tail boom.
15.Highly rigid 3K carbon fiber side frames for simple maintenance.
16.Tail blades, tail boom, and tail boom supports all utilize high strength carbon fiber material.
17.High torque rated one way bearing base.
18.New lightweight landing gears.
Users must have a certain concept of security to operate the R/C helicopters.
Be sure to read and comply with related safety notes of instruction manual before flying.
● Length: 1328mm
● Height: 408mm
● Main Blade Length: 690mm
● Main Rotor Diameter: 1562mm
● Tail Rotor Diameter: 281mm
● Motor Drive Gear:12T
● Main Drive Gear:115T
● Autorotation Tail Drive Gear: 104T
● Tail Drive Gear: 24T
● Drive Gear Ratio: 1:9.58:4.33
● Weight(With Motor): 2980g
● Flying Weight: Approx. 4800g
Specification(3G FLS)
●Suitable Voltage Range:DC 3~8.4V
●Current Comsumption:<80mA @ 4.8V>
●Flip and Roll rate detection speed: :±300degrees/sec
●Rudder rate detection speed:±500degrees/sec
●Sensor resolution: 12bit
●Operating temperatur:-20℃~65℃
●Operating humidity:0%~95%
●RoHS certified
●Dimension: Control box:42x26.5x14.5mm
Sensor:22.3x21.7x14mm
●Weight: Control box:16g
Sensor:9g
Accessories(Included in the Package)
●T-REX 700E Kits Set X1
●Aluminum Tail Boom X1
●3K Carbon Fiber Tail Boom X1
●700M Brushless Motor X1
●105mm 3K Carbon Fiber Tail Blades X1 Set
Radio transmitter and electronic equipment required for assembly:
●Transmitter(7-channel or more, helicopter system)
●Receiver(7-channel or more)
●ESC (12S Li-Po 80A or more)
●DS610 Digital servoX3
●GP780 Head lock comboX1
●690D Carbon fiber bladesX1
●5A and higher external BEC(uses when ESC doesn have BEC build in)
●6S Li-Po 4500 ~ 5200mAh X2
●Dial Pitch Gauge
Kwangnaru Electric Funfly Festival - 2010!
|
