Arrowind Brushless ESC 40A

- 전세계적으로 인정을 받고있는 Arrowind 전자변속기.

   다양하고 세밀한 세팅이 가능한 브러쉬리스용 변속기 입니다.

   높은 해상도로 중급자이상의 유저에게 강력추천해 드립니다.

Arrowind ESCs are built to extremely accurate standards and very high quality materials are used throughout. Arrowind are proud of that quality and are happy to display it to you by the use of clear heatshrink outer covering. That quality results in predictable, high performance time after time.

The setup of each ESC can be made using stick commands, or in a much more user-friendly way, with the optional program card. The LCD display on the card is easy to read and the program steps are logical. The program card has all the options written on it to save you always carrying the instructions!

Each ESC comes pre-programmed for Li-Po cells as part of the default. All other battery types can be used by programming the exact low voltage cut-off value you require relative to the type of battery. You can of course course use Li-pos at a different cut-off value as well.

By selecting the correct combination of parameters, these ESCs can be used for Aircraft, gliders and helicopters alike.

Programmable Features:

• Cut Off Voltage: Low voltage protection threshold, User can set voltage threshold according to cell quantity within a range of 00.0~49.9v.
  Default is 00.0V (Li-Po automatic) (컷오프 모드 00.0v ~ 49.9v로 세밀하게 세팅가능)
• Start Power Position Percentage: (00%~29%)
  Default is 00% ( 스타트 파워 설정시 00%~29% 까지 세팅가능, 숫자를 올릴수록 초기 파워가 강해집니다.)
• Timing Mode: Low/Mid/High/Highest
  Default is Middle ( 4가지 타입의 타이밍 모드 설정가능.)
• Brake Type: Off/Soft/Hard
  Default is Off (brake disabled) ( 모터 브레이커 설정시 하드브레이크 까지 설정가능합니다. 정밀한 브레이크 이용가능)
• Start Mode: Fast Start/Soft Start/Very Soft Start
  Default is Fast ( 스타드 모드 설정가능)
• Cutoff Type: Soft-Cut/Cut-Off
  Default is to reduce the output power (Soft-Cut) ( 컷오프 기능)
• Throttle Curve Mode: CURVE1/CURVE2/CURVE3
  Default is curve1 (Linear) ( 스로틀 커버 설정기능)
• Motor Rotation: Forward and Reverse
  Default is Forward ( 모터 정방향 역방향 설정 기능)