나만의 카테고리 지정 도움말

나만의 카테고리를 설정하시면 상품검색을 매우 편리하게 이용하실 수 있습니다.
설정된 카테고리 클릭시 바로 지정된 상품 분류로 이동합니다.
마이페이지>나만의 카테고리에서 명칭변경, 순번변경, 삭제등을 하실 수 있습니다.

상품명RC10B4.1 Factory Team Worlds Car
브랜드어소시에이티드
상품코드AAK9040
판매가격375,000원
포인트 3,750점 (회원에게만지급)
메모

메모하기 도움말

메모를 해두시면 상품 구매 시 유용하게 활용하실 수 있습니다.
마이페이지>나의작성글>메모상품보기 에서 회원님이 메모하신 전체상품을 한 눈에 확인하실 수 있습니다.

매장재고 주문접수 후 수입사에 재고,수량 확인 후 배송되는
상품으로 당일 또는 2~3일 이내 배송가능한 상품

주문수량 금액 원

RC10B4.1 Worlds Car

5-Time I.F.M.A.R. World Champion!

Since its release in 2003 the RC10B4 remains undefeated on a world level having won five I.F.M.A.R. World Championships in a row! In commemoration of our most recent 2WD Off Road World Championship win, we are proud to bring you the RC10B4.1 Worlds Car kit. The RC10B4.1 Worlds Car kit comes with the chassis specd out the same as the Team Associated buggies that were driven by Ryan Cavalieri, Ryan Maifield, and Neil Cragg at the 2011 I.F.M.A.R. World Championships in Vaasa, Finland.

The RC10B4.1 Factory Team Worlds Car kit has all the latest Factory Team features, starting with the +8mm B4.1 chassis conversion. The +8mm chassis greatly improves the overall stability and handling of the buggy making it easier to drive and lowering your lap times. Topping off the +8mm B4.1 chassis is the Pro-Line Bulldog +8mm body.

Other features include the Factory Team 0 degree rear hubs, Factory Team rear ballast weight and the new B4.1 Factory Team Worlds Car setup sheet.

Features

+8mm B4.1 chassis conversion kit
Pro-Line Bulldog +8mm body
Factory Team 0 degree rear hubs
Factory Team rear ballast weight
New B4.1 Worlds Car setup sheet
Ball differential with light-weight outdrives
Pro-Line M3 Holeshot 2.0 rear and M3 4-rib front tires
Factory Team V2 hard anodized threaded shock bodies with bleed-screw caps
V2 slipper assembly with high-rate spring for more consistent slipper clutch adjustments
CVA joints with pin retainer clips
Durable steel center-drilled front axles
Suspension mounts for 4, 3.5, 3, and 2.5 degrees rear toe included
Blue titanium turnbuckles
Complete set of precision ball bearings
Factory Team blue aluminum hinge pin brace, milled motor plate, servo mounts and much more!

Vehicle Specifications

Power Source:	Electric
Terrain:	Off-Road
Body Style:	Buggy
Scale Size:	1:10 Scale
Assembly Level:	Kit*
Length:	385mm (15.16in)
Width:	250mm (9.84in)
Wheelbase:	281mm (11.06in)
Weight:	1535g (3.38 lbs)
Internal Gear Ratio:	2.6:1
Drive:	2WD

* This vehicle comes as a kit and must be fully assembled by the user. Electronics and/or an engine/motor may be required.

Required to Complete

RC 2-channel surface frequency radio system
Battery pack
Battery charger
Electronic speed control
RC electric motor
Pinion gear
Paint for the body
Glue for tire and wheels

RC10시리즈의 최신판 Associated RC10B4.1 Factory Team Worlds Car가 출고되었습니다.

기존에 2륜 차량을 굴리던 유저분의 차량으로 기본적인 옵션이 포함된

Associated RC10B4.1 Factory Team Worlds Car차량에 추가로 육각휠어댑터만

추가하였습니다.

RC10B4.1 Factory Team Kit Features:

5-Time I.F.M.A.R. World Champion and 5-Time R.O.A.R. US National Champion!
==> 국내대회에서도 많은 우승기록이 있습니다.

+8mm B4.1 chassis conversion kit
==> 8mm가 길어진 신형 섀시가 포함

Pro-Line Bulldog +8mm body
==> 프로라인 +8mm 불독바디가 기본으로 포함

Factory Team 0° aluminum rear hubs with oversized outer bearing
==> 수지제 리어허브에서 0도 메탈제 옵션리어허브포함

Factory Team rear ballast weight
==> 팩토리팀 옵션기본포함

Ball differential with lightweight outdrives
==> 경량아웃드라이브 볼디프

Factory Team V2 hard-anodized threaded shock bodies with bleed-screw caps
==> 신형 v2쇽

V2 slipper assembly with high-rate spring for more consistent slipper clutch adjustments
==> 신형 v2 슬리퍼시스템

Pro-Line M3 Holeshot 2.0 rear and M3 4-rib front tires
==> 프로라인제 홀샷 리어타이어,4-리브프론트타이어 포함

CVA drive shafts with pin retainer clips
==> CVA 유니버샬샤프트

Durable steel center-drilled front axles
==> 강화프론트액슬

Carbon-fiber battery strap with blue aluminum thumb screws
==> 카본배터리 스트랩

Optimized suspension setup for use with LiPo batteries
==> 리포배터리 대응 셋업

Suspension mounts for 4°, 3.5°, 3°, and 2.5° rear toe included
==> 다양한 서스마운트 포함

Blue titanium turnbuckles
==> 티탄턴버클

Complete set of precision ball bearings
==> 풀볼베어링

New B4.1 Worlds Car setup sheet
==> 신형 데칼

Factory Team blue aluminum hinge pin brace, milled motor plate, servo mounts and much more!
==> 알루미늄 힌지브레이스,모터플레이트,서보마운트포함

Photo Gallery

Ryan Cavalieris 2011 I.F.M.A.R. Worlds winning B4.1

Pro-Line Bulldog +8mm body

+8mm B4.1 chassis

CVA joints with pin retainer clips

Factory Team 0˚ rear hubs

Factory Team V2 hard-anodized threaded shock bodies

V2 slipper assembly with high-rate spring