No.32760　　 Complete Chassis Set






*Can be operated with previous MINI-Z Racer ASF2.4 GHz 2-channel transmitter.

Chassis pre-installed with high performance brushless motor!
Next generation MINI-Z introduces even more durability and power!

The next evolution of the MINI-Z Racer now incorporates the latest brushless motor technology into its performance. Never used before on a MINI-Z, this model includes the same-sized ‘Team Orion XSPEED VE’ brushless motor with its characteristic high durability, power, RPM and a flat torque feel. The MINI-Z takes full advantage of the brushless motor’s efficient low friction; non-contact properties that minimize wear and reduce electrical noise to deliver outstanding linear response and smooth acceleration for a sensorless brushless motor that is approved for use in the MINI-Z Cup and other official races. A limit applied to maximum RPM keeps the playing field level for all drivers. In addition, a newly designed circuit board with ICS function connects to a PC (adapter sold separately) for precision setting adjustments. Just download the ‘ICS VE Manager’ software from the Kyosho website to manage the brushless motor settings and remove the RPM limit to extract the full potential from your machine. The newly designed upper cover also allows simple mounting of the optional gyro on top and the chassis is equipped with the MR-03 ball diff that was previously optional. Now the MR-03’s dynamic performance is turbo-charged with brushless motor power to mark a new stage in the evolution of MINI-Z performance and technology.


 

• MR-03 Chassis Set installed with brushless motor
• Ball Diff Set (No.MZW206) included as standard.
• Compatible with all existing MINI-Z Racer body types.
• Special brushless motor circuit board features 3 LEDs to indicate proper function.
• Redesigned upper cover enables simple installation of gyro.
• Compatible with optional parts for the MR-03 chassis.
• Features newly developed innovative ‘VCS’ front suspension that changes camber angle in concert with suspension stroke.
• ASF2.4GHz R/C system removes need to manage frequency bands. A single transmitter can be used with multiple models. **Transmitter is sold separately.
• Equipped with digital steering servo with integrated coreless motor.
• Coil springs on front suspension can be easily replaced by removing the spring stopper with just two screws.
• Features high efficiency gold plated motor terminals.
• Pre-calibrated zero point steering setting.

brushless motor

In place of the brush and commutator used in brushed motors up until now, brushless motors rely on the electric circuit to power the motor. To generate power, brushed motors required constant contact between the brush and commutator, which generated resistance and caused wear on the contact areas to reduce the motors durability. Brushless motors eliminate this problem and produce higher power output, torque and higher top end performance from the same power input. As there is no contact area, durability is improved so the motor maintains its higher level of performance for longer. These characteristics allow R/C models to perform at higher levels than ever before.

MR-03 Chassis Types

Chassis type for each MR-03 set is displayed below. Refer to this table when fitting a MINI-Z Racer body.

＜Note: When Converting＞ ●Front tread ： When converting to narrow or wide tread, the appropriate type of front lower and upper plates as well as the steering tie rod are required. ●Rear tread ： Install the special wheels included on the each body. ●Wheelbase ： Adjust with the parts included on the body.

 Kit Contents ＞

• Factory assembled MR-03W chassis installed with Team ORION XSPEED VE brushless motor.
• One-piece RA-27 receiver and brushless motor circuit board equipped with ICS connector
• Modification parts for RM-type motor mount
• Upper and lower plate and steering tie rod for (front) narrow tread (included)
• Front suspension spacers for adjustment
• Pinion Gears (7T, 8T, 9T)
• Wheel wrench
• Pinion gear tool
• Pairing stick
• Spare wheel nuts

 Required for Operation ＞

• ASF 2.4GHz Perfex KT-18 transmitter for MINI-Z or Kyosho EX-5UR ASF transmitter (No.82011)
• AAA sized alkaline batteries or Ni-MH x 4 for chassis
• AAA sized alkaline batteries x 4 for transmitter (KT-18), AA sized alkaline batteries x 8 (EX-5UR)

Chassis Technical Data

Length	124～133mm（MM Chassis:125～133mm、RM Chassis:124～132mm）
Width	65～76mm
Height	34～35mm
Wheelbase	86～106mm（86、90、94、98、102、106）
Tread (F/R)	(Wide)61.5mm / 59mm　(Narrow)56.5mm / 56.5mm [when wheel offset is 0]
Tire(F/R)	23.5～25×8.5mm　/　25～27×8.5～11mm
Gear Ratio	7.3、6.3、5.5、4.9：1
Weight	135g approx.
Motor	Team ORION XSPEED VE