KY32110B MF-015 w/oTX Chassis Set ASF2.4GHz

New Chassis in the F1 serie

Technical data
Length: 182 mm Width: 82 mm; trace (v): 68 mm; trace (h): 66 mm Wheelbase: 130 mm tires (v): 27x14 mm tires (h): 27x16 mm Weight: 190 g. Engine: 130s

RC functions
Gas brake, steering

Description
F 1 Racing - Get Ready For The Pole Position! The engines roar, the starting light turns green and all hell breaks loose. Such scenarios start you know so far only seen on TV. Get this atmosphere into the living room now. Make it possible to F1 - cars in scale 1:24. But not only in driving the use of small runabouts ensure maximum performance. Even when removed from the package you hold in your hands a model, which is also seen optically unequaled and can exist next to each vehicle in the collector's display case. KYOSHO's careful research and close collaboration with the racing stables of the F1 manufacturers have created a dream for you in 1:24.

The MF-015 Mini-Z racers are equipped with the latest 2.4 GHz wireless technology. It scans the remote control when you turn the entire frequency band and automatically selects a clear channel. Thus the denial of frequencies omitted among the drivers. A total of up to 40 models can be operated simultaneously. In this new system does not come more crystals are used. The frequencies are generated by a PLL synthesizer.

With the new transmission technology, the entire electronics in the MF-015 has been revised. The new processor runs faster and gives the MF-015 in conjunction with the HiSpeed ​​FETs an ultra-fast response. The delivery of the Formula Racer takes place without the 2.4 GHz transmitter. For the operation of the models is the KYOSHO Perfex KT-18 transmitter, Model No. 82001E required.

At the 2.4 GHz receiver control unit can optionally be connected to the piezo gyros DNW-107 to increase the stability of the model. The piezo gyros registered vehicle movement around the vertical axis (skidding), long before they are visible to the human eye and controls within a split second it.

At the front sits a high-resolution digital servo that transmits the steering commands to the transmitter in a split second on the wheels.

The front wheels are independently mounted and equipped with double wishbone suspension. The high-grip racing slick tires give the Mini-Z Racer Formula uncompromising traction. In conjunction with the extremely low center of gravity is a breathtaking driving dynamics achieved which is in models of this size has never been achieved before.

The Main Board of the MF-015 has been standard on the ICS interface. (Not supplied) with a special USB cable and software, the chassis can be configured via a computer. The setup data of the vehicle can be conveniently stored on the hard disk.

The rear axle of the MF-015 chassis is based on proven Mini-Z Formula components. Due to the suspension, the chassis is Powerpod very flexible and adapts to any road situation perfectly. The flight batteries are adjacent in the model, whereby the center of gravity is very low.

Fine Hand Polish
A special feature of the MF-015 Mini-Z Formula racers, the finely detailed painting of the models and the already applied decoration. The models make the body even finishing in the top cabinet bribe a fine figure and through their myriad details. After the assembly, and final quality control, the models are hand polished and brought to a shine. Sun-shine formula racers like a precious jewel, when you emerge from their packaging.

Features
• Fully assembled driving Formula Racer
• Motherboard with innovative 2.4GHz wireless technology
• Designed for the inclusion of almost all Mini-Z Formula bodies
• High-resolution digital steering servo with coreless motor
• ICS-interface for connection to laptop
• Operation is no conventional quartz
• Integrated servo saver
• Top Performance!
• Connection of piezo gyros (optional)
• Easy replacement of cells
• Up to 40 vehicles can be operated simultaneously
• Huge selection of tuning parts and car bodies
• bevel gear differential on the rear axle
• high-grip racing slicks
• Extremely low center of gravity
• Driving without a pre-constructed chassis transmitter

No body set chassis only