Specifications |
Back to Top ^ |
Type: Nitro Buggy
Scale: 1/8
Length: 19.6 in
(497mm)
Width: 12.1 in (308mm)
Height: 7.1 in
(180mm)
Ground Clearance: 2.4 in (60mm)
Wheelbase: 12.7
-12.9 in (323-327mm)
Weight: 7.8 lb (3.5kg)
Chassis: 4mm,
6061 T-6 Aluminum
Suspension: Independent
Drivetrain:
4WD
Motor or Engine: .21 Dynamite
Radio: Spektrum DX2E
2-Channel
Servos: Included
Batteries: Dynamite NiMH Battery
6V 1600mAh Reciever Pack 3+2 Hump
Gear Pitch: 1.0Mod
Kit/RTR:
RTR
Shock Type: 16mm Big Bore Aluminum Oil Filled
Body:
8IGHT Cab -Forward, Screened
Ball Bearings: Yes
Fuel Tank
Capacity: 125cc (4.2 Oz)
Experience Level:
Intermediate
Recommended Environment: Outdoor
Is Assembly
Required: No
You will need...
• 20–30% Nitromethane fuel
• Nitromethane-Approved Dispenser
• NiMH
Charger
• Glow Igniter
Race-Proven Durability
In addition to its 4mm T-6 aluminum chassis plate, the 8IGHT Nitro buggy uses a Gen III radio tray that prolongs steering and throttle servo life with features like ball-bearing linkages and more accurate linkage alignment. It has been designed to resist wear and tear from chassis flex, too.
Brute Power
A powerful Dynamite .21 nitro engine gives you all the grunt you need to be a front runner, right out of the box. It is equipped with a convenient pull-start so you don't have to buy a starter box to get racing right away.
Metal-Gear Drivetrain and Sealed Differentials
A metal-gear transmission and sealed differentials give the buggy all the durability it needs for long mains and rough conditions.
Center and Rear Dogbones
These eliminate the friction of a CV coupler and improve bump handling in the rear of the car.
Pre-Set Suspension Geometry
The suspension geometry is pre-set from the factory to match that used by professional team drivers so you can hit the track with confidence. And because it uses fixed-length turnbuckles and steering arms, you know it will remain consistent race to race.