조종기/수신기/서보
>
>
- 특가 할인제품
- 전동 자동차
- 엔진 자동차
- 1/8 전동/컨버젼
- 가솔린 자동차
- 초보입문용 세트차량
- 탱크/보트/오토바이
- MINI-Z 키트/부품
- 자동차 부품
- 탱크/보트/오토바이부품
- 자동차바디/LED/튜닝 관련
- 조종기/수신기/서보
- 크리스탈
- 리튬배터리/관련악세사리
- 배터리/충.방전기관련
- 전선/잭/스위치관련
- 모터/변속기 전동관련
- 엔진/머플러/플러그 관련
- RC용 연료 관련
- 타이어/휠/관련
- 쇽/스프링/볼앤드/턴버클
- 공구/가방/박스/계측기
- 페인트/오일/케미컬
- 모델링 용품
- 베어링
- 나사/너트/와셔/E·O링
- 키덜트/과학교재
- 비행기
- 헬기
- 레이싱 드론(FPV)
- 드론(멀티콥터)
- UBEC-8A (Large Current BEC) by HOBBYWING (디지털 수신기 전원장)
- 엔진헬기와 전동헬기구 비행기에 별도 수신기 전원장치 사용시 사용하실수 있는 제품입니다
- 엔진헬기,전동헬기 사용시 기체 서보 전원 6v를 공급할수 있는 제품입니다
- 러더 서보 구동시 별도에 전압변환 장치가 포합되있어 러더서보에 5.3v를 공급할수있는 제품입니다
(러더 서보 구동시 수신기를 통해서만 러더 서보에 전원이 공급됩니다 )
|
Model |
UBEC-8A (Large Current BEC) | |
|
Manual |
User Manual | |
|
Accessory |
A step-down voltage regulator wire (6V to 5.3V) |
|
|
Preview |
The 8A-UBEC is a switch-mode DC-DC regulator supplied with a 2-3 cells lithium battery pack and it outputs a consistent safe voltage for your receiver, gyro and servos. It is very suitable for RC helicopter (above 30 class) and big fixed-wing aircraft.
Compared with the linear mode UBEC, the overall efficiency of the switch-mode BEC is much higher, so it can extend the working time of the receiver battery pack, and because a switch mode UBEC can significantly reduce the heat emission, it can avoid the loss of control caused by the over-heat problem which is frequently happened with the linear mode UBEC. 1 Specification 1.1 Output Voltage: 5V or 6V (Changeable with an output-voltage select switch )
1.2 Continuous output current: 8 Amps
1.3 Burst output current: 15 Amps
1.4 Input: 6V-12.6V (2-3 cells lithium battery pack)
1.5 Quiescent current: 60mA
1.6 Size: 42mm*39mm*9mm (length*width*height)
1.7 Weight: 34g
2 Features 2.1 Designed with an advanced switch mode DC-DC regulator IC.
2.2 The output current is very large.
2.3 With the output short-circuit protection function.
2.4 A metal shield covers almost all the electronic components, and a specially made filter is attached with the output wires to significantly reduce the electromagnetic interference.
2.5 Automatically detects the number of the lithium battery pack (2 cells or 3 cells).
2.6 Shows the battery capacity with 4 indicators (LEDs).
2.7 Shows the working status with an indicator (LED), lights when the output is in normal range.
2.8 There are 2 output leads to reduce the resistance when connecting the UEBC to the receiver.
|
|
